Filter

Filter

The filter effectively purifies the water particles, dust, oil mist and other shapes contained in the compressed air through interception, dilution, diffusion, neutralization, etc. So that the compressed air is clean and dry and the quality of the product gas is improved.

Class C, main line filter, mostly used after the air compressor rear cooler or before the refrigerated dryer, can filter a large amount of liquid and solid particles above 3um, and reach the minimum residual oil content of only 5ppm.

Class T, dust removal filter, mostly used in tools, machinery, motors, gas tanks and other equipment and before A-level filters or after adsorption dryers, can filter out liquid and solid particles as small as 1um, and reach the minimum residual oil content of 0.5ppm .

Class A, super efficient degreasing filter, mostly used in the upstream of adsorption dryer or downstream of refrigerated dryer, can filter out liquid and solid particles as small as 0.01um, and reach the lowest residual oil content of only 0.01ppm. Remember to Install a T-class air line filter to protect it.

Class H, activated carbon micro-oil mist filter, mostly used to purify food, medicine, and breathing gas. It can filter out oil mist and hydrocarbons as small as 0,01um. The minimum residual oil content is only 0.003ppm. An A-level super efficient degreasing filter is installed upstream to protect it.

Noted：

1、Max pressure：≤1.0Mpa   

2、Use fluid temperature：C、T、A stage 66℃，H stage 50℃

3、Initial pressure drop： 0.01Mpa

4、Maximum allowable pressure drop： 0.07Mpa

5、Lifetime： C、T、A stage about 8000H，H stage 1000H

6、Connection type：0.5-1.2 series For the internal thread of the nozzles，The above 13 series are flange .

After-sales service commitment

Service quality and maximizing customer satisfaction are the eternal goals of Unicol Compressor. Our company has established 12 sales and service centers across the country, dedicated to providing pre-sales, in-sales, and after-sales services for new and old customers, and makes the following service commitments:

Pre-sales consulting service

Model selection consultation: We provide consultation services, technical consultation and information provision according to the needs of customers, comprehensively considering their production scale, air consumption, environment and other factors.

On-site service: We will provide consulting services on the configuration of engineering design accessories according to the customer's specific working conditions.

After-sales service items

Guide installation and commissioning, regular maintenance, and emergency rescue. Air compressor use guidance and related equipment experience consultation.

After-sales maintenance service Machine maintenance, machine repair, maintenance personnel training, suggestions for improvement and other items.

1. Serve users for life, with a 24-hour service hotline,

2. The customer department of Unicol Compressor Company receives customer calls, letters, visits and other warranty information, and after preliminary analysis, uses the "customer after-sales information sheet" to make after-sales service plans for the after-sales service department.

3. For malfunctioning products, the company promises to give a clear answer within 1 hour, and the office service personnel will reach the user site within 12 hours. If necessary, the headquarters will send personnel. Maintenance service personnel arrive at the equipment site within 24 hours to solve the problem.

4. The implementation of "Three Guarantees" for the factory products, the equipment quality guarantee period is 12 months after the insurance is accepted (or 18 months from the date of shipment), whichever comes first.

5. During the "three guarantees" service period, all problems caused by the quality of the product will be repaired by our company for free (except for quality accidents caused by user operation or improper use).

6. After receiving the notification from the buyer, the seller will send someone to the site to debug the compressor and other equipment within 2 days until the equipment is put into normal operation.

7. After the equipment is put into use, our company will conduct regular user return visits to grasp the usage status of the equipment.

8. The product implements life-long service, and the Beijing sales and service center has enough spare parts all the year round to ensure the timeliness of the service to ensure customer satisfaction.