Benefits of variable frequency screw air compressors with power savers

The following variable frequency screw air compressor manufacturers will introduce to you the benefits of installing a power saver on the air compressor

Energy saving

Compared with the traditionally controlled compressor, the energy saving of the air compressor control compressor is of practical significance. The compressor operating condition supplied according to the air volume demand is an economical operation state. From the current operating conditions of the equipment, The power saving rate can reach more than 20%,

Maintenance cost reduction

The air compressor power saver has a soft-start function, which reduces the impact of start-up on the equipment, and the amount of maintenance and repair is also reduced, so the maintenance cost will be greatly reduced.

Improve pressure control accuracy

The air compressor power saving control system has pressure control capability. The air pressure output of the compressor is matched with the air volume required by the user's air system, and the output air volume of the compressor is controlled to change with the change of the motor speed. As the accuracy of controlling the motor speed is improved, it can keep the system pressure change of the pipe network basically unchanged.

Extend the service life of the compressor

The power saver starts the compressor from 0HZ, and its starting acceleration time can be adjusted, thereby reducing the impact on the electrical and mechanical components of the compressor when starting, enhancing the reliability of the system, and prolonging the service life of the compressor. In addition, the control can reduce the current fluctuations when the unit is started. This fluctuating current will affect the power consumption of the grid and other equipment, and the power saver can effectively reduce the peak value of the starting current.

Reduced the noise of the air compressor

According to the requirements of the compressor's working conditions, after the power-saving transformation, the motor running speed is significantly slowed down, so the noise during the operation of the air compressor is effectively reduced.